How to Use Guide – PRO V2 & Essential V2 Models
Assembly
Stand Desk height adjustable desks are simple to put together. We have created a step-by step guide to assist you below:
> View Stand Desk V2 Assembly Guide
Assembly of your Stand Desk will take around 20 minutes. The assembly of your Stand Desk does not require any other tools and uses a super fast assembly frame system with pre-drill inserts to attach the desk to the frame.
We recommend two people are available to move the frame onto the desk top and to move the desk to an upright position.
No tools are required for assembly. An alan key comes with the desk and all attachment points are pre-drilled.
How to Use Guide
We recommend you read our how to best use your stand desk article. It covers off all the methodology to make the most of your Stand Desk.
The Stand Desk PRO V2 & Essential V2 models offer a height range of 620mm to 1270mm heights. In practice this will provide the correct range for sitting and standing positions for people between the heights of 4’11′ and 6’7” (149.5cm – 201cm).
Basic Controller Functions
Simply use the up and down arrows to move to your desired sitting or standing positions.
To save a position simply move to your desired sitting or standing position and press the M key on the right of the controller and then within 5 seconds press either the 1,2 3 or 4 button to save that position on that button.
You will now be able to move to that position with one button press.
Press and hold down the M button for 5 seconds until a menu appears. Use the up button to scroll through until you see the text “child lock”. Then press the M button again.
Select “persistent lock” and press M again. The screen will show “done”.
The control pad will now be locked after it goes into hibernation mode.
To unlock it press down the down button and timer (button on bottom right) together for 5 seconds.
Press and hold down the M button for 5 seconds until a menu appears. Use the up button to scroll through until you see the text “child lock”. Then press the M button again.
Select “disable lock” and press M again. The screen will show “done”.
Move the desk to the highest position you wish the desk to be able to go to.
Then press the M button and then the 3 button. Hold this for 2 or so seconds and it will display “upper limit height”. Release the buttons and the maximum height will now be set.
Move the desk to the lowest position you wish the desk to be able to go to.
Then press the M button and then the 1 button. Hold this for 2 or so seconds and it will display “lower limit height”. Release the buttons and the minimum height will now be set.
Press the M button and then the 2 button. Hold this for 2 or so seconds and it will display “remove h-limits”. Release the buttons and the minimum and maximum height limits will be removed
Press and hold down the M button and the down button for three seconds.
Your display will change from cm to inches or inches to cm.
Trouble Shooting
You will need to do a reset of the desk. Turn power off to the desk and unplug and then replug in all of the cables to the central control box. Then turn the power back on.
Then simply hold the up and down buttons together. After 5 seconds the desk will start moving down. Continue holding the buttons until the desk goes to its lowest height and makes a small movement back up.
Your desk will now be reset.
You will need to do a reset of the desk. Turn power off to the desk and unplug and then replug in all of the cables to the central control box. Then turn the power back on.
Then simply hold the up and down buttons together. After 5 seconds the desk will start moving down. Continue holding the buttons until the desk goes to its lowest height and makes a small movement back up.
Your desk will now be reset.
Sit / Stand Scheduling
You will need to do a reset of the desk. Turn power off to the desk and unplug and then replug in all of the cables to the central control box. Then turn the power back on.
Then simply hold the up and down buttons together. After 5 seconds the desk will start moving down. Continue holding the buttons until the desk goes to its lowest height and makes a small movement back up.
Your desk will now be reset.
