How To Use Guide – Stand Desk Original

How to Use Guide – Stand Desk Original Model

Assembly

Stand Desk height adjustable desks are simple to put together. We have created a step-by step video tutorial to assist you below:
> View Stand Desk Assembly Video

Assembly of your Stand Desk Original model will take 20 – 25 minutes. The assembly of your Stand Desk does not require any other tools and uses a fast assembly frame system with pre-drill insert to attach the desk to the frame.

 

We recommend two people are available to move the frame onto the desk top and to move the desk to an upright position.

No tools are required for assembly. An alan key comes with the desk and all attachment points are pre-drilled.

How to Use Guide

Simply place your wireless charging compatible device on the wireless charging outline to the left of the desk and it will start charging.

We recommend you read our how to best use your stand desk article. It covers off all the methodology to make the most of your Stand Desk.

The Stand Desk Original offers a height range of 600mm to 1250mm heights. In practice this will provide the correct range for sitting and standing positions for people between the heights of 5’0′ and 6’6” (152cm – 198cm).

Basic Controller Functions

Simply use the up and down arrows to move to your desired sitting or standing positions.

To save a position simply move to your desired sitting or standing position and press the S key on the right of the controller and then within 5 seconds press either the 1, 2 or 3 button to save that position on that button.

 

You will now be able to move to that position with one button press.

Press the Up and S buttons and hold them down together for 5 seconds. The desk will now be locked.

To unlock the desk simply repeat the same procedure.

You can set a maximum height and a minimum height your desk can go down to (for example to stop your desk lowering onto under desk drawers).

To set the maximum height press the S key and the 2 key and hold them down.  The digital tube will blink and display the real-time height. Press the UP or DOWN key to adjust to the maximum height required. Press the S key and 2 key again for 3 seconds to complete the setting.

To set the minimum height press the S key and the 1 key and hold them down.  The digital tube will blink and display the real-time height. Press the UP or DOWN key to adjust to the minimum height required. Press the S key and 1 key again for 3 seconds to complete the setting.

Press and hold the S key and the 3 key simultaneously to switch the display unit (cm & inch).

Trouble Shooting

You will need to do a reset of the desk. Simply hold the up and down buttons together and keep holding them. After 5 seconds the desk will start to lower. Keep holding the buttons down until the desk has reached its lowest height and until you hear a beep.

Your desk will now be reset to the correct heights.

You will need to do a reset of the desk. Simply hold the up and down buttons together and keep holding them. After 5 seconds the desk will start to lower. Keep holding the buttons down until the desk has reached its lowest height and until you hear a beep.

If you still are having issues with the desk please contact us asap and we will resolve any issues you may have.